New Easy Fit and re-Fit of Cartridge in FlowCon EVS-insert
FlowCon introduces the Next-Generation-Version of the FlowCon EVS-Insert, item no. EVS.0.0.0.
Naturally, the new FlowCon EVS-insert will fit in the same valve bodies as the previous one, i.e. A15/20/25, AB15/20/25 and ABV1 (DN15/20/25) and apply with the same range of actuators (EV.0.2-EV.0.5).
The new EVS-insert is launched to make fitting and particularly re-fitting of a new stainless steel cartridge easy.
When applying the stainless steel cartridge in the new FlowCon EVS-insert, please make sure that the cartridge o-ring is placed on the inside groove at the top of the EVS-insert before inserting the cartridge (photo 1 and 2). Hereafter the cartridge is easily inserted with a hard push (photo 3). Screw on the lock ring (photo 4 and 5) and the cartridge is correctly fitted. Then insert the EVS-insert into the valve body.
For exchange of the stainless steel cartridge, the procedure is simply reversed. Unscrew the lock ring and pull out the cartridge. The cartridge o-ring will also come out. Insert the new o-ring and afterwards insert the new stainless steel cartridge as described above.
New sub-center development in Upper West Shanghai
The super high-rise corner stone includes FlowCon PICVs, DPCVs and ABVs
New Modbus and BACnet actuator for small PICVs
Expansion to the FN-actuator range includes bus communication making interaction through BMS easy
Large-scale College of Science at Kuwait University
High level education and high level of temperature control united with FlowCon PICVs – running optimal year in and year out
Al-Masa Towers, New Alamein, Egypt
Egypt’s largest hospitality hotel with FlowCon PICVs and pre-tested By-Pass Assemblies for fast and trouble-free installation, flushing and…
FlowCon’s Climate Action
Without knowledge and baseline, it is impossible to make a clear CO2 reduction roadmap and document improvements